SPC560B60L7B6E0X
Datasheet
Product Details
General description
The MPC5607B is a new family of next generation microcontrollers
built on the Power Architecture™ embedded category. This document
describes the features of the family and options available within
the family members, and highlights important electrical and
physical characteristics of the device.
The MPC5607B family of 32-bit microcontrollers is the latest
achievement in integrated automotive application controllers. It
belongs to an expanding family of automotive-focused products
designed to address the next wave of body electronics applications
within the vehicle. The advanced and cost-efficient host processor
core of the MPC5607B automotive controller family complies with the
Power Architecture embedded category and only implements the VLE
(variable-length encoding) APU (Auxillary Processor Unit),
providing improved code density. It operates at speeds of up to 64
MHz and offers high performance processing optimized for low power
consumption. It capitalizes on the available development
infrastructure of current Power Architecture devices and is
supported with software drivers, operating systems and
configuration code to assist with users implementations.
Features
• Single issue, 32-bit CPU core complex (e200z0h)
— Compliant with the Power Architecture™ embedded category
— Enhanced instruction set allowing variable length encoding (VLE)
for code size footprint reduction. With the optional encoding of
mixed 16-bit and 32-bit instructions, it is possible to achieve
significant code size footprint reduction.
• Up to 1.5 Mbytes on-chip Flash supported with the Flash
controller
• Up to 96 Kbytes on-chip SRAM
• Memory protection unit (MPU) with 8 region descriptors and
32-byte region granularity on certain family members
• Interrupt controller (INTC) capable of handling 204
selectable-priority interrupt sources
• Frequency modulated phase-locked loop (FMPLL)
• Crossbar switch architecture for concurrent access to
peripherals, Flash, or RAM from multiple bus masters
• 16-channel eDMA controller with multiple transfer request sources
using DMA multiplexer
• Boot assist module (BAM) supports internal Flash programming via
a serial link (CAN or SCI)
• Timer supports I/O channels providing a range of 16-bit input
capture, output compare, and pulse width modulation functions
(eMIOS)
• 2 analog-to-digital converters (ADC): one 10-bit and one 12-bit
• Cross Trigger Unit to enable synchronization of ADC conversions
with a timer event from the eMIOS or PIT
• Up to 6 serial peripheral interface (DSPI) modules
• Up to 10 serial communication interface (LINFlex) modules
• Up to 6 enhanced full CAN (FlexCAN) modules with configurable
buffers
• 1 inter-integrated circuit (I2C) interface module
• Up to 149 configurable general purpose pins supporting input and
output operations (package dependent)
• Real-Time Counter (RTC)
— Clock source from internal 128 kHz or 16 MHz oscillator
supporting autonomous wakeup with 1 ms resolution with maximum
timeout of 2 seconds
— Optional support for RTC with clock source from external 32 kHz
crystal oscillator, supporting wakeup with 1 sec resolution and
maximum timeout of 1 hour
• Up to 8 periodic interrupt timers (PIT) with 32-bit counter
resolution
• Nexus development interface (NDI) per IEEE-ISTO 5001-2003 Class
Two Plus
• Device/board boundary scan testing supported per Joint Test
Action Group (JTAG) of IEEE (IEEE 1149.1)
• On-chip voltage regulator (VREG) for regulation of input supply
for all internal levels
Specifications
| Attribute | Attribute Value |
|---|
| Manufacturer | STMicroelectronics |
| Product Category | Microcontrollers |
| Series | SPC56 |
| Packaging | Tape & Reel (TR) |
| Package-Case | 176-LQFP |
| Operating-Temperature | -40°C ~ 105°C (TA) |
| Supplier-Device-Package | 176-LQFP (24x24) |
| Number-of-I-O | 149 I/O |
| Speed | 64MHz |
| EEPROM-Size | - |
| Core-Processor | e200z0h |
| RAM-Size | 80K x 8 |
| Program Memory | FLASH |
| Peripherals | DMA, LVD, POR, PWM, WDT |
| Connectivity | CAN, I2C, LIN, SCI, SPI, UART/USART |
| Voltage-Supply-Vcc-Vdd | 3 V ~ 5.5 V |
| Core-Size | 32-Bit |
| Program-Memory-Size | 1MB (1M x 8) |
| Data-Converters | A/D 53x10/12b |
| Oscillator-Type | Internal |
Descriptions
e200z0h Automotive, AEC-Q100, SPC56 Microcontroller IC 32-Bit 64MHz
1MB (1M x 8) FLASH 176-LQFP (24x24)
MCU 32-bit e200 RISC 1MB Flash 3.3V/5V Automotive 176-Pin LQFP T/R
ARM Microcontrollers - MCU MID MICROCONTROLLER
Who we are?
is a professional electronic marketing corporation entirely engaged
in the fields of semi-conductors and electronic components sale and
service for clients over 10 years, specialize in selling the new
and unused, original factory sealed packing electronic components.
specialize in IC,diode,transistor,IGBT,DC-DC converter.....***has
set up our own sales service conception and has already established
strong partnerships with many famous manufacturers and we have more
than 5,000,000 kinds of electronic components for your choices,
always at your services !
FAQ
Q: Are you trading company or manufacturer?
A: We are original manufacturer OF Integrated Circuit Chip . We can do OEM/ODM business.
Q: How long is your delivery time?
A: Group buying delivery time: 30-60 days; General delivery time: 20
days.
Q: What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery.
Q: How to buy your products?
A: You can buy the products from our company directly.Normally the
procedure is sign the contract, payment by T/T,Contact the shipping
company to delivery the goods to your country.
Q: What is the warranty ?
A: The free warranty is one year from the day of Commissioning
qualified.If there is any fault for our products within the free
warranty period, we will repair it and change the fault assembly
for free.
