Specification
| Attribute | Attribute Value |
|---|
| Manufacturer | Texas Instruments |
| Product Category | IC Chips |
| Series | Stellaris® ARM® Cortex®-M3S 8000 |
| Product | MCU |
| Packaging | Tray Alternate Packaging |
| Mounting-Style | SMD/SMT |
| Tradename | Stelaris |
| Package-Case | 108-LFBGA |
| Operating-Temperature | -40°C ~ 85°C (TA) |
| Supplier-Device-Package | 108-BGA (10x10) |
| Number-of-I-O | 42 I/O |
| Speed | 50MHz |
| EEPROM-Size | - |
| Core-Processor | ARMR CortexR-M3 |
| RAM-Size | 64K x 8 |
| Program Memory | FLASH |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Connectivity | CAN, Ethernet, I2C, IrDA, Microwire, QEI, SPI, SSI, UART/USART |
| Voltage-Supply-Vcc-Vdd | 2.25 V ~ 2.75 V |
| Core-Size | 32-Bit |
| Program-Memory-Size | 256KB (256K x 8) |
| Data-Converters | A/D 4x10b |
| Oscillator-Type | Internal |
| Maximum Operating Temperature | + 85 C |
| Operating temperature range | - 40 C |
| Operating-Supply-Voltage | 2.5 V 3.3 V |
| Interface-Type | CAN I2C SPI SSI UART |
| Core | ARM Cortex M3 |
| Processor-Series | Stellaris |
| Software Development Kit | EKS-LM3S8962 |
| Data-Bus-Width | 32 bit |
| Supply-Voltage-Max | 2.75 V 3.6 V |
| Supply-Voltage-Min | 2.25 V 2.3 V 3 V |
| Package-Case | nFBGA-108 |
| Maximum-Clock-Frequency | 50 MHz |
| Number-of-ADC-Channels | 4 ADC Channels |
| Input/output | 42 I/O |
| Data-RAM-Size | 64 kB |
| Number-of-Timers-Counters | 6 Timer |
| ADC-Resolution | 10 bit |
Form,Package
Product Details
[Luminary Micro, Inc.]
Architectural Overview
The Luminary Micro Stellaris™ family of microcontrollers—the first
ARM® Cortex™-M3 based controllers—brings high-performance 32-bit
computing to cost-sensitive embedded microcontroller applications.
These pioneering parts deliver customers 32-bit performance at a
cost equivalent to legacy 8- and 16-bit devices, all in a package
with a small footprint.
Product Features
The LM3S801 microcontroller includes the following product
features:
■ 32-Bit RISC Performance
– 32-bit ARM® Cortex™-M3 v7M architecture optimized for
small-footprint embedded applications
– Thumb®-compatible Thumb-2-only instruction set processor core for
high code density
– 50-MHz operation
– Hardware-division and single-cycle-multiplication
– Integrated Nested Vectored Interrupt Controller (NVIC) providing
deterministic interrupt handling
– 26 interrupts with eight priority levels
– Memory protection unit (MPU) provides a privileged mode for
protected operating system functionality
– Unaligned data access, enabling data to be efficiently packed
into memory
– Atomic bit manipulation (bit-banding) delivers maximum memory
utilization and streamlined peripheral control
■ Internal Memory
– 64 KB single-cycle flash
• User-managed flash block protection on a 2-KB block basis
• User-managed flash data programming
• User-defined and managed flash-protection block
– 8 KB single-cycle SRAM
■ General-Purpose Timers
– Three timers, each of which can be configured as a single 32-bit
timer or as two 16-bit timers
– 32-bit Timer modes:
• Programmable one-shot timer
• Programmable periodic timer
• Real-Time Clock when using an external 32.768-KHz clock as the
input
• User-enabled stalling in periodic and one-shot mode when the
controller asserts the CPU Halt flag during debug
– 16-bit Timer modes:
• General-purpose timer function with an 8-bit prescaler
• Programmable one-shot timer
• Programmable periodic timer
• User-enabled stalling when the controller asserts CPU Halt flag
during debug
– 16-bit Input Capture modes:
• Input edge count capture
• Input edge time capture
– 16-bit PWM mode:
• Simple PWM mode with software-programmable output inversion of
the PWM signal
■ ARM FiRM-compliant Watchdog Timer
– 32-bit down counter with a programmable load register
– Separate watchdog clock with an enable
– Programmable interrupt generation logic with interrupt masking
– Lock register protection from runaway software
– Reset generation logic with an enable/disable
– User-enabled stalling when the controller asserts the CPU Halt
flag during debug
■ Synchronous Serial Interface (SSI)
– Master or slave operation
– Programmable clock bit rate and prescale
– Separate transmit and receive FIFOs, 16 bits wide, 8 locations
deep
– Programmable interface operation for Freescale SPI, MICROWIRE, or
Texas Instruments synchronous serial interfaces
– Programmable data frame size from 4 to 16 bits
– Internal loopback test mode for diagnostic/debug testing
■ UART
– Two fully programmable 16C550-type UARTs
– Separate 16x8 transmit (TX) and 16x12 receive (RX) FIFOs to
reduce CPU interrupt service loading
– Programmable baud-rate generator with fractional divider
– Programmable FIFO length, including 1-byte deep operation
providing conventional double-buffered interface
– FIFO trigger levels of 1/8, 1/4, 1/2, 3/4, and 7/8
– Standard asynchronous communication bits for start, stop, and
parity
– False-start-bit detection
– Line-break generation and detection
(Continue ...)
Target Applications
■ Factory automation and control
■ Industrial control power devices
■ Building and home automation
■ Brushless DC and AC induction motors
Architectural Overview
The Luminary Micro Stellaris™ family of microcontrollers—the first
ARM® Cortex™-M3 based controllers—brings high-performance 32-bit
computing to cost-sensitive embedded microcontroller applications.
These pioneering parts deliver customers 32-bit performance at a
cost equivalent to legacy 8- and 16-bit devices, all in a package
with a small footprint.
Product Features
The LM3S101 microcontroller includes the following product
features:
■ 32-Bit RISC Performance
– 32-bit ARM® Cortex™-M3 v7M architecture optimized for
small-footprint embedded applications
– Thumb®-compatible Thumb-2-only instruction set processor core for
high code density
– 20-MHz operation
– Hardware-division and single-cycle-multiplication
– Integrated Nested Vectored Interrupt Controller (NVIC) providing
deterministic interrupt handling
– 14 interrupts with eight priority levels
– Unaligned data access, enabling data to be efficiently packed
into memory
– Atomic bit manipulation (bit-banding) delivers maximum memory
utilization and streamlined peripheral control
■ Internal Memory
– 8 KB single-cycle flash
• User-managed flash block protection on a 2-KB block basis
• User-managed flash data programming
• User-defined and managed flash-protection block
– 2 KB single-cycle SRAM
■ General-Purpose Timers
– Two timers, each of which can be configured as a single 32-bit
timer or as two 16-bit timers
– 32-bit Timer modes:
• Programmable one-shot timer
• Programmable periodic timer
• Real-Time Clock when using an external 32-KHz clock as the input
• User-enabled stalling in periodic and one-shot mode when the
controller asserts the CPU Halt flag during debug
– 16-bit Timer modes:
• General-purpose timer function with an 8-bit prescaler
• Programmable one-shot timer
• Programmable periodic timer
• User-enabled stalling when the controller asserts CPU Halt flag
during debug
– 16-bit Input Capture modes:
• Input edge count capture
• Input edge time capture
– 16-bit PWM mode:
• Simple PWM mode with software-programmable output inversion of
the PWM signal
■ ARM FiRM-compliant Watchdog Timer
– 32-bit down counter with a programmable load register
– Separate watchdog clock with an enable
– Programmable interrupt generation logic with interrupt masking
– Lock register protection from runaway software
– Reset generation logic with an enable/disable
– ARM PrimeCell®-compliant peripheral and cell identification
registers
– User-enabled stalling when the controller asserts the CPU Halt
flag during debug
■ Synchronous Serial Interface (SSI)
– Master or slave operation
– Programmable clock bit rate and prescale
– Separate transmit and receive FIFOs, 16 bits wide, 8 locations
deep
– Programmable interface operation for Freescale SPI, National
Semiconductor MICROWIRE™, or Texas Instruments synchronous serial
interfaces
– Programmable data frame size from 4 to 16 bits
– Internal loopback test mode for diagnostic/debug testing
■ UART
– Fully programmable 16C550-type UART
– Separate 16x8 transmit (TX) and 16x12 receive (RX) FIFOs to
reduce CPU interrupt service loading
– Programmable baud-rate generator with fractional divider
– Programmable FIFO length, including 1-byte deep operation
providing conventional double-buffered interface
– FIFO trigger levels of 1/8, 1/4, 1/2, 3/4 and 7/8
– Standard asynchronous communication bits for start, stop and
parity
– False start bit detection
– Line-break generation and detection
■ Analog Comparators
– Two independent integrated analog comparators
– Configurable for output to drive an output pin or generate an
interrupt
– Compare external pin input to external pin input or to internal
programmable voltage reference
■ GPIOs
– 2 to 18 GPIOs, depending on configuration
– Programmable interrupt generation as either edge-triggered or
level-sensitive
– Bit masking in both read and write operations through address
lines
– Programmable control for GPIO pad configuration:
• Weak pull-up or pull-down resistors
• 2-mA, 4-mA, and 8-mA pad drive
• Slew rate control for the 8-mA drive
• Open drain enables
• Digital input enables
■ Power
– On-chip Linear Drop-Out (LDO) voltage regulator, with
programmable output user adjustable from 2.25 V to 2.75 V
– Low-power options on controller: Sleep and Deep-sleep modes
– Low-power options for peripherals: software controls shutdown of
individual peripherals
– User-enabled LDO unregulated voltage detection and automatic
reset
– 3.3-V supply brownout detection and reporting via interrupt or
reset
■ Flexible Reset Sources
– Power-on reset (POR)
– Reset pin assertion
– Brown-out (BOR) detector alerts to system power drops
– Software reset
– Watchdog timer reset
– Internal linear drop-out (LDO) regulator output goes unregulated
■ Additional Features
– Six reset sources
– Programmable clock source control
– Clock gating to individual peripherals for power savings
– IEEE 1149.1-1990 compliant Test Access Port (TAP) controller
– Debug access via JTAG and Serial Wire interfaces
– Full JTAG boundary scan
■ Package
– 28-pin RoHS-compliant SOIC
– Commercial and industrial operating temperatures
Target Applications
■ Factory automation and control
■ Industrial control power devices
■ Building and home automatio
Descriptions
ARM? Cortex?-M3 Stellaris? ARM? Cortex?-M3S 8000 Microcontroller IC
32-Bit 50MHz 256KB (256K x 8) FLASH 108-BGA (10x10)
MCU 32-bit ARM Cortex M3 RISC 256KB Flash 2.5V/3V/3.3V 108-Pin
NFBGA
ARM Microcontrollers - MCU IC ARM CORTEX MCU
Who we are?
is a professional electronic marketing corporation entirely engaged
in the fields of semi-conductors and electronic components sale and
service for clients over 10 years, specialize in selling the ne and
unused, original factory sealed packing electronic components.
specialize in IC,diode,transistor,IGBT,DC-DC converter.....***has
set up our own sales service conception and has already established
strong partnerships with many famous manufacturers and we have more
than 5,000,000 kinds of electronic components for your choices,
always at your services !
FAQ
Q: Are you trading company or manufacturer?
A: We are original manufacturer OF Integrated Circuit Chip . We can do OEM/ODM business.
Q: How long is your delivery time?
A: Group buying delivery time: 30-60 days; General delivery time: 20
days.
Q: What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery.
Q: How to buy your products?
A: You can buy the products from our company directly.Normally the
procedure is sign the contract, payment by T/T,Contact the shipping
company to delivery the goods to your country.
Q: What is the warranty ?
A: The free warranty is one year from the day of Commissioning
qualified.If there is any fault for our products within the free
warranty period, we will repair it and change the fault assembly
for free
